Questions tagged [docker]
For questions regarding using Stellar applications within the Docker virtualisation tool.
31
questions
0
votes
1answer
28 views
stellar horizon docker install error -history-archive-urls must be set when --ingest is set
I'm trying to install stellar core and horizon via docker:
and I get this error when start
horizon_1 | 2020/05/26 23:50:15 --history-archive-urls must be set when --ingest is set
$ docker ps
...
4
votes
1answer
110 views
Timeout after 6000ms after submitting a transaction
Whenever I submit a transaction I get a timeout error (after 60 secs). The server is a docker quickstart image in standalone mode. To solve the issue I am have to run the image with -e LOG_LEVEL="...
4
votes
2answers
109 views
Own stellar horizon is not showing data prior to own instance launch date
I run a stellar node using the docker quickstart image and due to some syncing error the underlying ec2 instance was terminated and restarted on 2018-12-28T10:45:19Z, state of core is Synced.
...
0
votes
0answers
12 views
“ingest_latest_ledger” and “history_latest_ledger” freezes, though “core_latest_ledger” increases
I am using "docker-stellar-core-horizon" on Ubuntu-18.04, RAM -16GB
(I have also tried the entire thing on CentOS-7, please provide a solution that works for both Ubuntu and CentOS).
Docker version- ...
1
vote
1answer
16 views
How can I send lumens over local docker quickstart image using accounts made on local image and not the testnet
I am following the stellar walkthrough for creating two accounts, a source and a destination using the testnet. However, I would like to use my local docker quickstart image to facilitate the ...
2
votes
1answer
148 views
How to connect to a stellar stand alone node?
My goal was to set up a small test network with two stellar nodes. Therefor, I forked the quickstart repo and made some small adjustments. I changed the public key and the network passphrase.
On my ...
1
vote
1answer
81 views
How to provide password when running horizon db migrate up command inside docker container?
I have issues with horizon, when inside the docker container I run horizon db clear and I get the output
There are 18 migrations to apply in the "up" direction.
...
2019/06/20 10:44:26 A database ...
0
votes
1answer
41 views
problem running the core+horizon container in standalone mode
I can start a standalone container with this command:
sudo docker run --rm -it -p "8000:8000" -v "/home/maxou/stellar:/opt/stellar" --name stellar stellar/quickstart --standalone
I can call rest ...
1
vote
0answers
18 views
Which docker image to use for running a private Stellar network with 3 nodes?
I'm trying to run a private Stellar network with 3 nodes, each also running horizon. There are 2 docker images which seem to be useful for my case, but I don't know which one to use.
The first one is ...
0
votes
0answers
5 views
Can't stop stellar-core using supervisorctl inside quickstart docker image
I want to stop stellar-core to make some changes in config file. The only way to stop it is to use supervisorctl but when I enter supervisorctl stop stellar-core I get
unix:///var/run/supervisor....
0
votes
1answer
70 views
Connection refused error in Horizon
Launching Horizon with stellar/quickstart docker image:
horizon db init --db-url postgres://stellar:123456789@127.0.0.1:5432/core --stellar-core-db-url postgres://stellar:123456789@127.0.0.1:5432/...
2
votes
1answer
37 views
Can the docker quickstart allow me to test out “becoming an anchor”?
Or must I set up according to the Administration documentation then follow the steps on configuring a bridge server, federation server, etc.
As the documentation steps in becoming an anchor seems to ...
1
vote
0answers
71 views
Stellar-core running in Docker container, but not inside supervisorctl. If run in supervisorctl it doesn't use the right config
In the docker container if I run stellar-core using supervisortctl, then logs do not get written to the file I have specified in my stellar-core.cfg, but if I start stellar-core outside of ...
2
votes
1answer
76 views
How to relaunch a Testnet node to use the new Testnet after a reset while using the Docker quickstart container?
What are the recommended steps that should be taken to get a stellar testnet node using the quickstart docker reset on the new testnet?
Currently it is still using the old network by the looks of it,...
1
vote
2answers
93 views
Should I start with docker quickstart or stellar core? Any difference?
Situation:
I am trying to implement a payment network, I guess kind of similar to World Wire, and I am not sure how should I start off.
Have yet to use docker before, so I'm a bit overwhelmed by the ...
2
votes
1answer
74 views
Asset endpoint returns 404 on standalone network
I build a docker image from the v0.17.0 tag of docker-stellar-core-horizon.
Then, I created a local standalone network from that image:
docker run --rm -d -p "8000:8000" -p "11626:11626" \
-p "...
0
votes
3answers
107 views
How to pass in a different config file when running a stellar quickstart docker container?
The Stellar quickstart contains a config file at stellar/core/etc/stellar-core.cfg which it uses by default to start stellar core once the container is first run.
How can do a first run of the ...
1
vote
2answers
74 views
Enable https for horizon in the docker-stellar-core-horizon quickstart template
Is there an easy way to enable https for the horizon server?
If not, how would you recommend to update the docker file to enable https?
3
votes
0answers
39 views
Change stellar quickstart docker from ephemeral to persistent without shutting it down
I made the mistake of running my Stellar instances with the -v "/home/Drew/XCoin:/Drew/XCoin" flags instead of the required -v "/home/Drew/stellar:/opt/stellar"flags that Stellar recommends on the ...
5
votes
1answer
194 views
stellar core docker address in use
I am running stellar core docker. When I get into the container and type stellar-core. it gives this error:
GAGCM [default INFO] Starting stellar-core v9.2.0
GAGCM [default INFO] Config from stellar-...
4
votes
2answers
113 views
Horizon returns 404 when trying to query accounts/{ID}/payments
I've spun up a Stellar horizon server using the Docker image mentioned in the repo below
https://github.com/stellar/docker-stellar-core-horizon
It spins up just fine but I don't get any payment ...
1
vote
2answers
63 views
Why do request with the SDK work without starting a local Node?
I followed this guide to create an account and get the balance. I am also running this docker instance.
I am confused (and impressed) that I don't have to start a node (e.g. the docker instance) or ...
1
vote
1answer
40 views
Stellar Core from Source vs. Stellar Core from Container
Are there any vulnerabilities or security considerations I should be aware of with running Stellar Core from source as opposed to running it from the Docker Container?
4
votes
1answer
158 views
stellar docker and nginx reverse proxy
I am running a stellar docker using this command:
sudo docker run -d --rm -it -p "7777:8000" --name stellar stellar/quickstart --testnet
which will bind the horizon (port 8000) to my host port ...
4
votes
1answer
240 views
A complete catchup of the testnet keeps failing on verifying ledger
Trying to perform a full sync on the Stellar testnet using a recent dockerized stellar/quickstart in persistent mode (horizon: v0.13.1, core: v9.2.0, docker: v18.06.0-ce). After around 10 hours the ...
5
votes
3answers
726 views
How to get status of historical ledgers synced after setting CATCHUP_COMPLETE=true
I had problems getting the node to resync all past ledgers and had to start from scratch. I can see that stellar-core is writing ledgers to disk, but I'm not sure how to check the status of it, or ...
2
votes
1answer
55 views
Horizon import failed (Integer type error?)
I configured a custom docker-compose with Postgres, Stellar Core and Horizon as seperate services. Core and Horizon are running and are responsive via HTTP. Stellar-Core is running on Livenet and is ...
4
votes
1answer
166 views
How do you use the stellar quickstart without docker?
It says "The easiest way to install Horizon is by using stellar/quickstart docker image."
But I can't run the "docker pull" command without docker.
I went to download docker from their site and ...
1
vote
2answers
170 views
What is the proper way to use federated addresses to send funds?
Stellar Docs are great, but I feel they miss the content for bringing all the servers together.
If an entity is acting as a custodian on behalf of their users and uses a Hot/Cold wallet architecture ...
3
votes
1answer
241 views
Issue with Stellar Quickstart Docker Image
I'm trying to run the docker stellar/quickstart image. I launch it with:
docker run -d -p "8000:8000" --name stellar stellar/quickstart --testnet
I've left it running for quite some time but it ...
14
votes
4answers
414 views
Can Stellar-core be packaged in a container system such as Docker?
I want to incorporate Stellar-core and horizon into my private infrastructure using Docker. Can Stellar-core be packaged in a container system such as Docker?
