Skip to main content
Share Your Experience: Take the 2024 Developer Survey
20 votes
Accepted

Can I create a non-fungible token?

Yes. You will have to create a separate asset for each item (kitty/land/area). The key part is that you currently can't change number of decimal places for assets on Stellar which are, by default, ...
Bartek Nowotarski's user avatar
17 votes
Accepted

How to create a token on the stellar network?

It's explained in Issuing Assets article in developer's portal. The process looks like this: Create an issuing account (let's call it account A) From any other account (let's call it B) create a ...
Bartek Nowotarski's user avatar
13 votes
Accepted

How to set inflation for tokens?

This is possible according to the stellar blog: Inflate token supply in a predefined schedule using pre-authorized transactions Issue a dividend In step 1, an issuing account is created. This is the ...
Noam Hacker's user avatar
13 votes

Where will the tokens released on Stellar be stored?

Tokens are "stored" in the ledger not in a wallet. You can use a wallet to manage and transfer them with a better UI. In stellar terms your tokens are Assets. They begin to "exist" on the ledger ...
alpe1's user avatar
  • 1,300
11 votes
Accepted

How can I list and sell Stellar based Tokens (not XLM)?

Most wallets support all functions needed for the token creation and distribution. The process is really straightforward. Create two account keypairs: the issuing and holder accounts. Fund both ...
Orbit Lens's user avatar
  • 6,886
10 votes
Accepted

Can you burn custom tokens on the Stellar network?

To freeze a custom asset you can send it to the other account and remove signers of the destination account (set master weight to 0). To burn a custom asset so it's not taken into account when ...
Bartek Nowotarski's user avatar
8 votes
Accepted

How does the Stellar Network tell the difference between a newly issued token and a Lumen?

Assets in Stellar network are represented as a pair that consists of: the code of the asset (ex. MOBI) the issuer account of the asset (ex. GA6HCMBLTZS5VYYBCATRBRZ3BZJMAFUDKYYF6AH6MVCMGWMRDNSWJPIH) ...
Bartek Nowotarski's user avatar
8 votes
Accepted

Is it possible to create Stellar Assets that are private?

Yes. (See the Stellar website below.) And if you don't set an offer it will not be listed on sdex. I don't know what this means... You are the only one who can issue the asset so you are in full ...
nick0816's user avatar
  • 188
7 votes

Could I apply this token scenario in stellar?

Sure, it's possible. You'll need to setup your own server with database and pretty straight-forward logic. Setup listening to All Payments endpoint in streaming mode. In that way you can monitor all ...
Orbit Lens's user avatar
  • 6,886
6 votes
Accepted

Is there a library for stellar equivalent to web3js for Ethereum?

If you want to write a Stellar-powered solution, start with Stellar Development Guides. All tasks from your list are very basic and all of them are described in the documentation, so without any ...
Orbit Lens's user avatar
  • 6,886
6 votes

Can I create a non-fungible token?

Short answer: right now it's not possible as the way assets are represented is done using trust lines that by design don't distinguish between tokens. Convoluted answer: you could do it by issuing an ...
MonsieurNicolas's user avatar
5 votes
Accepted

What does error "tx_insufficient_balance" mean for Change Trust?

When you add a trust line, the minimum required balance of the account increases by 1 x base reserve. In order to hold a trust line in your new account, it would need a balance of 1.5 XLM. From the ...
Synesso's user avatar
  • 3,367
4 votes

How to create a token on the stellar network?

I created the following to help understand this.
swidnikk's user avatar
  • 181
4 votes

How to create a token on the stellar network?

https://stellar.army - see second tab. The code is also opensourced, see the github link on top right.
Steve Gehrman's user avatar
4 votes
Accepted

Can different assets on Stellar be associated with one another programmatically?

Assets are related to each through offers on the DEX. If you make two standing offers to openly trade a pair of assets in both directions to set the trading value between them, then that relationship ...
MikeFair's user avatar
  • 396
4 votes
Accepted

Can a token issued on Stellar determine its own transaction fees?

No, it's not possible. The maximum you can do is to control who is allowed to purchase your token with AUTHORIZATION REQUIRED flag.
Orbit Lens's user avatar
  • 6,886
3 votes

Maximum Total Supply

Maximum asset amount an account can hold is determined by the particular trustline settings and may be up to 922,337,203,685. Total asset supply is unlimited.
Orbit Lens's user avatar
  • 6,886
3 votes

How Do I "distribute" multiple times?

Technically you don't have to, although having 6 accounts for different distribution phase may be a better option if there is a need for different signatories per phase.
tracy's user avatar
  • 212
3 votes
Accepted

Do tokens created through Stellar map one-to-one?

No. New tokens on Stellar are created through adding a trustline with a Change Trust operation. You can set up as many trustlines as you want so long as you fulfil the minimum account balance (...
Brian Ng's user avatar
  • 188
3 votes

Problems creating a payment

This happens when there are unused signatures attached to the transaction. One scenario is when you have multiple signers and one signature with enough weight to process the transaction + plus another ...
Ashish Prajapati's user avatar
3 votes

How to issue a dividend in Stellar?

Deploy your own Stellar Core node. Query trustlines table of the underlying database directly to retrieve a list of your asset holders and the amount they hold. Split the list in batches, 100 accounts ...
Orbit Lens's user avatar
  • 6,886
3 votes

Token units in whole number

No, there's no support for indivisible units in Stellar.
Johan Stén's user avatar
  • 1,947
3 votes

Are transactions validated by anchors, and how are they rewarded?

Nobody is rewarded for validating transactions. All transactions are equal, regardless of the assets involved. Anchors do not validate transactions. Validation is done by validating nodes. People ...
Synesso's user avatar
  • 3,367
2 votes

How to create a token on the stellar network?

Note that you can do this on the commandline using Lumen. Here's an example to create the HAK token on the testnet. # Create accounts for issuer and distributor $ lumen account new issuer $ lumen ...
0xfe's user avatar
  • 86
2 votes
Accepted

Is it possible to make a request to an account other than "Friendbot" to receive Lumens?

There is an operation called createAccount, and it's used to activate accounts with a starting balance. In fact all friendbot does is exactly what you are saying (it has a base account with a large ...
Paul's user avatar
  • 1,184
2 votes

Can you burn custom tokens on the Stellar network?

Freezing Assets can also be done by revoke authorization, if you are the issuer and not in control over the account holding the asset .. read the chapter Requiring or Revoking Authorization https://...
nick0816's user avatar
  • 188
2 votes
Accepted

How many Lumens would I have to get in order to create a custom token?

The issuing account doesn't actually need anything other than the normal 1 XLM, but any wallet that is going to hold your token will have to add a trust line, and doing that will increase its minimum ...
user3188445's user avatar
  • 1,221
2 votes
Accepted

Can I do a multi recipient transaction for a custom token?

The fee is per-operation, soyes you can put 100 'payment' operation inside a transaction, each one with its own recipient, but you will still pay a 100 stroops fee (0.003$ at that time). This ...
Mister Ticot's user avatar
2 votes

Creating an intermediate token on Stellar

First, issue your tokens. Create an offer on the Stellar decentralized exchange, so users will be able to buy the token directly from you for Stellar lumens. You can also integrate some third party ...
Orbit Lens's user avatar
  • 6,886
2 votes
Accepted

How a new created token to be listed on Stellarterm directory?

Steps taken from stellarterm github, you need to follow these steps https://github.com/stellarterm/stellarterm/tree/master/directory#first-show-that-you-have-9-things-needed Fork the repo to your ...
Peter's user avatar
  • 236

Only top scored, non community-wiki answers of a minimum length are eligible